BIS/ISI Consultants in Balasore
BIS/ISI consulting and certification support for organisations in Balasore. Typical clients: Pipe and fitting makers under mandatory certification orders.
Get Started
ISO consultants in Balasore reply within one business day. hello@lakshy.com · +91 98217 80035
Product licences for tyre, rubber and metal producers
Balasore’s industrial base includes products that fall under the Bureau of Indian Standards’ compulsory certification. The district administration names Birla Tyres among its large-scale industries and Odisha Rubber Industries among its award-winning small units[1]. The BIS list of products under the ISI Mark scheme includes tubes for pneumatic tyres and tyres for two-wheelers, three-wheelers, passenger cars and commercial vehicles[2]. A manufacturer of a listed product needs a BIS licence before it can make or sell the product, and the licence carries continuing obligations on testing, marking and quality control.
For a Balasore producer, a BIS licence is therefore a condition of market access. Licence holders have to maintain testing facilities, follow the scheme of inspection and testing for the product, mark every unit correctly and allow surveillance by BIS. Units that supply components, compounds or packaging to licensed manufacturers are also pulled into the system, because their material has to support the licensee’s test results.
Alloy, steel and plastics products under the compulsory list
The compulsory list also covers metal products. It includes ferrosilicon and a long series of steel products, from hot rolled carbon steel sheet and strip to stainless steel wire rod and steel plates for pressure vessels[2]. The State Designated Agency for energy conservation lists Balasore Alloys at Balgopalpur in the iron and steel sector[3]. Metal producers and processors in the district need to check each product against the list and its standard before launch, and again whenever the list is amended.
Plastics processing is another strand of the district’s economy, supported through a plastic and sal leaf cluster under the District Industries Centre[4]. The list changes over time: packaged drinking water, for example, is marked as de-notified from compulsory certification[2]. A plastics unit should therefore confirm whether a product is covered before planning a licence, and may still choose a voluntary BIS licence where buyers or tenders call for the ISI mark.
Upgraded industrial estates make this planning more relevant. The Industries Department reports approved upgrading plans for the Angargadia industrial estate in Balasore district under the MSME cluster programme, and land acquisition for further MSME parks in the district[5]. A new unit that intends to make a listed product should design its process, raw material checks and laboratory around the product standard from the start. Retrofitting a test laboratory or changing a raw material source after the plant is built is slower and costlier than planning for the licence at the layout stage.
What a Balasore licence holder has to keep in order
BIS grants product licences; the scheme sets what a licensee must maintain. For a Balasore unit, the practical requirements and related state rules include:
- Applying to BIS for the product licence against the relevant Indian Standard; BIS has a branch office in Bhubaneswar[6].
- In-house testing facilities and a quality control system matching the product’s scheme of inspection and testing, with records available for BIS surveillance.
- Factory registration and licence under the Occupational Safety, Health and Working Conditions Code, 2020, which replaced the Factories Act, 1948 from 21 November 2025,[7] and the Odisha Factories Rules, 1950[8].
- Consent to operate from the Odisha State Pollution Control Board, renewed with each application due 120 days before expiry[9].
- Employment obligations under the four Labour Codes, in force since 21 November 2025[10].
A licensee that keeps these records in one controlled system finds surveillance visits and licence renewals far easier to manage. Changes to the product standard or the compulsory list should trigger a review of the test plan and marking, with an assigned owner and a date.
How a Balasore assignment is served
Lakshy covers Odisha from its Chennai office. Lakshy ISO/GRC experts visit Balasore for the steps that need them on site: mapping each product to its Indian Standard and scheme of testing, reviewing the in-house laboratory and test equipment, preparing the quality control plan and records, a mock factory inspection and support during the BIS officer’s inspection. Between visits, the application file, test records and corrective actions are managed remotely on Effivity. BIS, not Lakshy, grants the licence. Lakshy has not published a Balasore case study; the case studies below come from BIS engagements elsewhere in India.
BIS certification (ISI mark): scope, steps, time and cost
BIS certification is product certification by the Bureau of Indian Standards, confirming that a product conforms to the relevant Indian Standard. The outcome is a licence to mark products, granted and kept under surveillance by BIS itself, not a management system certificate. Under Scheme-I (the ISI mark licence) BIS assesses the factory, checks in-house testing and samples, and grants the licence; under Scheme-II (Compulsory Registration) electronics and IT products are registered on test reports from BIS-recognised laboratories. For products covered by a Quality Control Order, manufacture, import and sale without it are not permitted.
How a Lakshy project runs. Training; applicability and gap assessment; in-house testing capability, the Scheme of Inspection and Testing and quality records; product testing at BIS-recognised laboratories; the application on Manak Online; a mock assessment; then grant and marking. A prepared domestic factory typically obtains an ISI mark licence in 30 to 90 days; Compulsory Registration typically takes 3 to 6 weeks.
What it costs. For single-product domestic manufacturers, consulting typically falls between ₹90,000 and ₹3,00,000 (indicative), depending on scope and man-days. BIS statutory fees and laboratory testing charges are added at their published rates, and any test equipment the Indian Standard requires is separate; registrations cost less. A free gap assessment gives an exact quotation.
Why Lakshy. ISO/GRC experts, 8,100+ clients since 2003, a 100% on-time completion record. Work between visits runs on the free Effivity platform.
Read the full BIS guide: schemes, Quality Control Orders, factory visit and costs →
Included in every Lakshy engagement: a five-user Effivity ISO & GRC software subscription and complimentary Sterling Academy awareness e-learning for your team.
Frequently asked questions in Balasore
How do we know if our product needs a BIS licence?
Check whether it appears on the BIS list of products under compulsory certification or under a quality control order. If it does, a licence is required before manufacture and sale. Recheck the list periodically, because products are added and de-notified over time.
Does a BIS licence need an in-house laboratory?
Product schemes generally require the manufacturer to have test facilities for routine tests, with some tests done at BIS-recognised laboratories. The exact requirement depends on the product standard and its scheme of inspection and testing.
Is ISO 9001 required for a BIS licence?
No, it is not a precondition. A working quality system does make it easier to keep testing, marking and records in order between BIS surveillance visits.
Who grants the licence?
The Bureau of Indian Standards grants the licence after document review, factory inspection and testing. Lakshy prepares the unit for each stage.
Sources for this page
- Economy, About District (District Administration, Balasore, Government of Odisha, accessed 2026-10-23)
- Products under compulsory certification: Scheme-I (ISI Mark Scheme) (Bureau of Indian Standards, 2026-10-21)
- Designated consumers under the PAT scheme in Odisha (Engineer-in-Chief (Electricity)-cum-PCEI, Odisha (State Designated Agency), accessed 2026-10-23)
- District Industries Centre, Balasore: RTI manual (RTI Odisha portal, Government of Odisha, accessed 2026-10-23)
- Annual Activity Report 2023-24 (Industries Department, Government of Odisha, 2024-09)
- Bhubaneswar Branch Office (Bureau of Indian Standards, 2026-08-24)
- Government Announces Implementation of Four Labour Codes to Simplify and Streamline Labour Laws (Press Information Bureau, Ministry of Labour & Employment, 2025-11-21)
- Registration of Factory and Grant of Licence (e-Services) (Directorate of Factories and Boilers, Government of Odisha, accessed 2026-10-23)
- Consent to Operate (Odisha State Pollution Control Board, accessed 2026-10-23)
- Implementation of the four Labour Codes (PIB release) (Ministry of Labour and Employment / Press Information Bureau, 2025-12-08)
Client case studies
Selected Lakshy engagements with organisations like yours.
- Sector case studyAerospace AS9100D Certification — Client Case Study
- Sector case studyAerospace MRO AS9110 Certification — Client Case Study
- Sector case studyAI Start-up ISO 9001 Certification — Client Case Study
- Sector case studyAutomotive component manufacturer achieves IATF 16949 certification — Client Case Study
Talk to a Lakshy expert serving Balasore
Lakshy ISO/GRC experts work on site with organisations across Balasore. Your first conversation can be a call, a WhatsApp message or a video meeting, and we assign a dedicated ISO/GRC expert to you.
Related pages: BIS/ISI in India · ISO certification in Balasore · Odisha · All locations
Start with a free gap assessment.
Thirty minutes with a senior specialist, benchmarking your organisation against every requirement of the standard. No cost. No obligation.
Book My Free Session