ISO 22000 Requirements: How Food Safety Hazards Are Controlled
A plain-language walk through what ISO 22000 requires of food businesses and how hazards are kept under control.
Talk to a Lakshy ISO/GRC expert
Our ISO 22000 / HACCP & food safety expert will get back to you within one business day.
The short answer
ISO 22000 requires a food business to run a management system and control food safety hazards through prerequisite programmes, operational controls and a HACCP plan. You analyse hazards, set monitored limits, keep records, communicate along the food chain and review the system regularly through audits and management review.
A food safety failure rarely starts with a dramatic event. It usually starts with a small gap: a supplier nobody checked, a cleaning step done from memory, a temperature nobody wrote down. ISO 22000 exists to close those gaps before they reach a customer’s plate.
Why the requirements matter to your business
Large retailers, exporters and institutional buyers increasingly ask suppliers to show that food safety is managed through a system, not through the goodwill of a few supervisors. Meeting the ISO 22000 requirements gives you that proof, and it also gives your own team a common way of working.
The standard suits any organisation in the food chain: manufacturers, packers, caterers, storage and transport operators, and even makers of packaging that touches food.
The basic idea in plain terms
ISO 22000 combines two things. The first is a management system: policy, objectives, responsibilities, resources, internal audits and management review, the same habits you see in other ISO standards. The second is a disciplined way of controlling hazards, built on the well-known HACCP approach.
The standard requires you to think about what could make your food unsafe (biological, chemical or physical hazards), decide how serious each one is, and then put the right control in the right place.
How hazard control actually works
Not every control is equal, and the standard separates them sensibly:
- Prerequisite programmes are the basic hygiene foundations: cleaning, pest control, maintenance, personal hygiene, supplier approval, storage and transport conditions.
- Operational prerequisite programmes are specific controls for hazards that the foundations alone cannot manage, monitored at defined limits.
- The HACCP plan covers the critical control points, where a step must be controlled and measured so that a hazard is prevented or brought to an acceptable level.
You decide which hazard belongs where through a documented hazard analysis. That reasoning is what an auditor wants to see, not a copied template.
What auditors look for
An auditor will follow your product from raw material to dispatch and ask people on the floor how they know a control is working. Expect questions around:
- Whether your product descriptions and process flow diagrams match what actually happens on the line.
- Whether the hazard analysis is based on real information about your ingredients, equipment and customers, and whether it is reviewed when something changes.
- Whether monitoring records exist, are filled in on time, and lead to action when a limit is crossed.
- How you handle a product that may be unsafe, including withdrawal and recall arrangements.
- How top management stays involved, communicates with suppliers and customers, and prepares for emergencies.
Practical steps to apply it
- Appoint a food safety team that includes production, quality, maintenance and purchase, not only the quality department.
- Describe each product and draw the real process flow, walking the floor to confirm it.
- List the hazards at each step and decide which control type fits.
- Set limits and monitoring methods that operators can actually carry out.
- Define what happens when a limit is missed: correction, investigation and prevention of repeat.
- Check the whole system through internal audits before the certification body arrives.
If you are unsure how far you are from the standard, a gap assessment shows the distance and saves effort later.
Common mistakes and how to avoid them
Treating it as paperwork. A system written by a consultant and never used on the floor fails at the first interview. Involve the people who do the work.
Calling everything a critical control point. Too many CCPs make the plan unmanageable. Let the hazard analysis decide.
Forgetting the supply side. Raw material and outsourced processes carry real risk, so supplier approval and incoming checks deserve proper attention.
Ignoring change. A new ingredient, machine or customer requirement should trigger a fresh look at the hazard analysis.
Stopping at certification. The system has to keep running, with verification and updates, long after the certificate is displayed on the wall.
An illustration
Imagine a small packer of ground spices supplying a retail chain. Its team realises that the grinding step is well controlled, but metal fragments from a worn sieve are a physical hazard nobody monitors. They add a sieve inspection, a metal detection check and a clear rule on what to do when a fragment is found. Nothing dramatic, yet this is exactly the thinking the standard rewards.
Many Indian food businesses also work under FSSAI licensing; the FSSAI page explains how that relates to a management system, and larger exporters sometimes move on to FSSC 22000 when a customer asks for it.
How Lakshy can support you
An experienced ISO/GRC expert can help you build the system under our Design™ approach, where we develop it and you implement with our guidance, or take it end to end with Drive™. Certification itself is carried out by an accredited certification body that you choose.
ISO 22000 in three minutes
Frequently asked questions
What are the main requirements of ISO 22000?
You need a food safety policy and objectives, defined responsibilities, a hazard analysis, prerequisite programmes and HACCP-based controls, supplier and customer communication, emergency and recall readiness, internal audits and management review, with records proving all of it works.
Is ISO 22000 the same as HACCP?
No. HACCP is a method for identifying and controlling hazards. ISO 22000 includes HACCP principles but wraps them in a full management system with leadership, planning, resources, internal audit and continual improvement, which is why customers often prefer it.
Who can apply ISO 22000?
Any organisation in the food chain can apply it, including processors, packers, caterers, cold storage and transport operators and suppliers of food-contact packaging. Size does not matter; the system is scaled to your products, processes and the hazards you face.
Plan your next step
Talk to an experienced ISO/GRC expert about meeting the ISO 22000 requirements in your food business.
Related reading:
More from the ISO Certification Blog
New guides every week on ISO standards, audits and certification in India.
Start with a free ISO 22000 gap assessment.
Thirty minutes with a senior specialist, benchmarking your organisation against every requirement of the standard. No cost. No obligation.
Book My Free Session