ISO 17025 Accreditation & Consultants in Mohali
ISO 17025 is the international standard for testing and calibration laboratory competence — laboratories are accredited against it, in India by NABL. In Mohali its buyers are the pharma QC laboratories of the Mohali–Dera Bassi corridor and the calibration labs serving the city's instrumentation belt. Lakshy consults; NABL grants the accreditation.
Get Started
ISO 17025 consultants in Mohali reply within one business day. hello@lakshy.com · +91 98217 80035
ISO/IEC 17025 for Mohali’s pharmaceutical, research and calibration laboratories
Mohali has an unusually dense laboratory base for a city of its size. At NIPER alone, the central instrument laboratory works alongside dedicated laboratories for impurity profiling and stability testing, a bioavailability centre accredited by WHO and a toxicology centre run to GLP.[1] The Bureau of Indian Standards lists a regional laboratory in Mohali under its Northern Region Office.[2] The city’s pharmaceuticals SEZ[3] and the state’s active pharmaceutical ingredient and formulation units[4] each run quality control laboratories, and many rely on outside laboratories for specialised tests and calibration.
ISO/IEC 17025 is the standard that shows those laboratories are competent and their results are reliable. NABL accredits testing and calibration laboratories against it in India, and because NABL is a signatory to the ILAC and APAC mutual recognition arrangements, results from an accredited laboratory are easier for partner countries to accept.[5] For a contract testing laboratory in Mohali, accreditation is often the condition for winning pharmaceutical, food or export clients; for a calibration laboratory, it is what makes its certificates acceptable in audits.
Food, environmental and construction-material testing add further demand. Dairy units in a district whose One District One Product is milk and milk products,[6] campuses monitoring water and effluent, and builders testing materials all need results they can defend.
Why pharma QC and contract labs pursue accreditation
Revised Schedule M has raised the bar for laboratory controls. Notified on 28 December 2023, it has applied to every drug manufacturer since the extended deadline for smaller firms ended on 31 December 2025,[7] and its requirements on equipment qualification, method validation, data integrity and out-of-specification investigation overlap closely with ISO/IEC 17025.
Inspectors now look at laboratories closely. The March 2025 Lok Sabha reply notes that CDSCO and state regulators began risk-based inspections of drug manufacturing and testing firms in December 2022.[7] A testing laboratory that already operates to ISO/IEC 17025, with documented uncertainty, traceable calibration and proficiency testing, is far better placed for such an inspection than one that relies on custom alone.
Calibration laboratories in the area serve the same plants. Balances, pipettes, thermometers, pressure gauges and chromatography systems all need traceable calibration, and an accredited calibration provider nearby saves pharmaceutical and engineering units time and shipping risk.
Research institutions and start-ups add another group. Bioavailability, toxicology and analytical work done for regulatory submissions is judged on data quality, and accreditation or GLP compliance, depending on the study type, decides whether results are accepted.
Accreditation scope deserves careful choice. A laboratory should apply for the tests and calibrations its clients actually require, with methods validated and proficiency testing planned for each, rather than a broad scope it cannot sustain.
Requirements a Mohali laboratory system must sit within
- NABL accreditation rules. NABL’s specific criteria, policies on traceability, proficiency testing and uncertainty, and its assessment cycle, in addition to the standard itself.[5]
- Drug rules. For pharmaceutical testing, the Drugs and Cosmetics Rules and revised Schedule M set laboratory duties that inspectors check.[7]
- Laboratory waste and consents. Chemical and biological waste from laboratories needs proper authorisation and disposal, and larger sites hold consent from the Punjab Pollution Control Board, whose regional office is in Phase II, SAS Nagar.[8][9]
- Staff safety. The labour codes, in force since 21 November 2025,[10] cover chemical exposure, fume hoods, gas cylinders and emergency arrangements in the laboratory.
Clients’ contracts add requirements on confidentiality, report formats and turnaround, and the laboratory’s review of requests, tenders and contracts should record how each is met.
Impartiality and confidentiality are explicit requirements, which matters for laboratories owned by manufacturers or research institutions that also test for outside clients.
Equipment records, including calibration certificates, intermediate checks and maintenance logs, should be complete for every instrument that affects results.
How a Mohali ISO/IEC 17025 project is served
Lakshy serves Punjab from its New Delhi office. Lakshy ISO/GRC experts visit the Mohali laboratory for the gap assessment against ISO/IEC 17025 and NABL criteria, a review of method validation and verification, measurement uncertainty and traceability, a witness of testing or calibration work, and the internal audit and management review before the NABL assessment. Between visits, the quality manual, procedures, validation records and uncertainty budgets are built and reviewed on Effivity. Accreditation is granted only by NABL. Lakshy has not published a Mohali case study; the case studies below come from ISO/IEC 17025 engagements elsewhere in India.
ISO/IEC 17025 accreditation: scope, steps, time and cost
ISO/IEC 17025 sets the requirements for the competence, impartiality and consistent operation of testing and calibration laboratories. In India, laboratories are accredited against it by NABL, which assesses the laboratory’s management system and its technical work: methods and their validation, measurement uncertainty, traceability, equipment, personnel competence and the validity of results, parameter by parameter in the scope applied for.
How a Lakshy project runs. Gap assessment against the intended scope; quality manual and procedures; method validation or verification, uncertainty budgets and traceability; proficiency testing or inter-laboratory comparison; training and authorisation; internal audit and management review; then the application and the NABL assessment. Laboratories typically reach accreditation in 6 to 10 months end to end.
What it costs. Laboratory accreditation is a larger project than management-system certification: consulting typically falls between ₹3,00,000 and ₹7,00,000 (indicative), set by the disciplines and parameters in scope, plus the accreditation body’s fees as per its published fee schedule. A free gap assessment gives an exact quotation.
Why Lakshy. ISO/GRC experts, 8,100+ clients since 2003 and a 100% on-time completion record. Lakshy prepares your organisation; the accreditation decision is made by the accreditation body. Work between visits runs on the free Effivity platform.
Read the full ISO/IEC 17025 guide: requirements, NABL process, timeline and costs →
Included in every Lakshy engagement: a five-user Effivity ISO & GRC software subscription and complimentary Sterling Academy awareness e-learning for your team.
Frequently asked questions in Mohali
Who grants ISO/IEC 17025 accreditation in India?
NABL assesses laboratories against ISO/IEC 17025 and grants accreditation. Lakshy prepares the laboratory and does not accredit.
Can an in-house pharma QC laboratory in Mohali be accredited?
Yes. In-house laboratories can seek NABL accreditation for a defined scope of tests, which also strengthens their position in GMP inspections.
Do we need proficiency testing before applying?
NABL expects participation in proficiency testing or interlaboratory comparisons for the accredited scope, so planning rounds early, for each test, avoids delays at assessment.
Is GLP the same as ISO/IEC 17025?
No. GLP applies to non-clinical safety studies, while ISO/IEC 17025 covers testing and calibration competence. Some laboratories, such as those doing toxicology work, need both.
Where do laboratories usually struggle?
Measurement uncertainty and method validation records are the usual weak spots. Each method in the scope needs both documented, along with traceable calibration of the equipment it uses.
Client case studies
Selected Lakshy ISO/IEC 17025 engagements with organisations like yours.
- Sector case studyCalibration Laboratory Achieves ISO/IEC 17025 Accreditation — Client Case Study
- Sector case studyPharmaceutical Laboratory ISO 9001 and ISO/IEC 17025 Accreditation — Client Case Study
- Sector case studyTesting laboratory achieves ISO/IEC 17025 accreditation — Client Case Study
- Project announcedAG Thermolink: ISO 17025 Laboratory System Project in Hyderabad
Talk to a Lakshy expert serving Mohali
Lakshy ISO/GRC experts work on site with organisations across Mohali. Your first conversation can be a call, a WhatsApp message or a video meeting, and we assign a dedicated ISO/GRC expert to you.
Sources for this page
- NIPER Mohali (Department of Pharmaceuticals, Government of India, accessed 2026-10-23)
- Northern Region Office (Bureau of Indian Standards, 2026-08-05)
- Operational SEZs under the jurisdiction of DC, NSEZ (Noida Special Economic Zone, Ministry of Commerce and Industry, accessed 2026-10-23)
- Pharmaceuticals incentives, Punjab (Invest India, accessed 2026-10-23)
- Introduction (National Accreditation Board for Testing and Calibration Laboratories, accessed 2026-10-23)
- Baseline Study on One District One Product (PMFME) (Punjab Agro Industries Corporation, 2021-11)
- Lok Sabha Unstarred Question No. 3593: Export of Substandard Drugs (Ministry of Health and Family Welfare, Lok Sabha, 2025-03-21)
- Contact details of Regional Offices (Punjab Pollution Control Board, accessed 2026-10-23)
- Policy of the Board (consents to establish and operate) (Punjab Pollution Control Board, accessed 2026-10-23)
- Welfare of Organised and Unorganised Sectors (four Labour Codes in force) (Ministry of Labour and Employment (PIB), 2025-12-08)
Start with a free gap assessment.
Thirty minutes with a senior specialist, benchmarking your organisation against every requirement of the standard. No cost. No obligation.
Book My Free Session