ISO & GRC consulting across India since 2003 Find consultants near you
ISO 27001 / MANESAR

ISO 27001 Consultants in Manesar

ISO 27001 consulting and certification support for organisations in Manesar. Typical clients: Engineering-services and R&D units handling OEM design data.

Get Started

ISO consultants in Manesar reply within one business day. hello@lakshy.com · +91 98217 80035

NO SPAM · NO OBLIGATION · CONFIDENTIAL
ISO 27001 IN MANESAR

Design data moving between OEMs, test labs and suppliers

Manesar handles a great deal of confidential engineering data. The district administration describes Gurugram as a centre for IT and BPO firms as well as a producer of passenger cars, motorcycles, scooters and components.[1] The state’s 2025 industrial policy describes Gurugram as a centre for information technology, start-ups and electronics.[2] In Manesar itself, the International Centre for Automotive Technology tests vehicles and components and certifies products for the PLI-Auto scheme.[3] Engineering-services units, design offices of component makers and test laboratories in and around the estate exchange CAD models, drawings, calibration files, test results and embedded software with vehicle makers every day.

Vehicle makers treat that data as a crown asset. A leaked drawing of an unreleased model, or tampered firmware in a control unit, can cost a programme. They therefore require suppliers that handle prototype parts, design data or software to show a managed approach to information security, and an ISO 27001 certificate from an accredited certification body is a common way to show it, often alongside customer-specific prototype-protection rules for test vehicles and parts.

Testing creates its own exposure. Test results, homologation files and prototype vehicles pass between laboratories, suppliers and vehicle makers before launch, and each hand-over is a point where data can be copied, photographed or lost. An ISMS assigns owners to these flows, sets rules for transfer and storage, and records who had access, which is what a vehicle maker’s security assessor will look for.

VEHICLE CYBER RULES

AIS-189 brings cyber security into the supply chain

Vehicle regulation now reaches into information security. AIS-189, published in April 2024 for the Automotive Industry Standards Committee set up by the Ministry of Road Transport and Highways, covers the approval of vehicles with regard to cyber security and the cyber security management system.[4] It applies to vehicles of categories M and N, and to category T vehicles fitted with at least one electronic control unit.[4] The vehicle maker’s cyber security management system must cover the development, production and post-production phases and manage dependencies on contracted suppliers and service providers.[4]

That last requirement flows straight to Manesar’s suppliers. Makers of electronic control units, telematics, infotainment, sensors and wiring with embedded software, and engineering firms that write or test that software, must be ready to show how they protect source code, keys, test benches and update files. ISO 27001 covers the organisation’s controls; product-level cyber security engineering is a separate discipline, but the two share risk assessment, access control, supplier management and incident response, so a certified ISMS gives the product team a working base.

Remote work adds to the scope. Many engineering teams in the belt work across Manesar sites, Gurugram offices and customer premises, using shared design platforms and remote access to test benches. Access rights, device management and secure file exchange then become everyday controls, not policy statements.

RULES THAT APPLY

Indian cyber and data duties in a Manesar ISMS

An ISO 27001 system for a Manesar engineering, IT or manufacturing unit has to treat these as legal or contractual requirements:

  • CERT-In directions of 28 April 2022 on reporting cyber incidents, keeping ICT system logs and synchronising system clocks.[5]
  • Digital Personal Data Protection Rules, notified in November 2025 with an 18-month phased compliance timeline, covering employee, contract-worker and customer personal data.[6]
  • AIS-189 obligations passed down by vehicle-maker customers through supply contracts.[4]
  • Confidentiality and prototype terms in development agreements, which set rules for photography, storage, transport and disposal of design data and prototype parts.

Shop-floor systems belong in scope too: machine controllers, test rigs and production data servers connect to the office network in many Manesar plants and are a frequent entry point for attacks.

WORKING WITH LAKSHY HERE

How a Manesar ISO 27001 project is served

Lakshy serves Manesar and the rest of Delhi NCR from its New Delhi office. Lakshy ISO/GRC experts visit for the risk-assessment workshop with engineering and IT teams, the walk-through of design offices, test areas and server rooms, the review of physical and prototype security, and the internal audit before the certification body’s stage two. Shop-floor network checks are timed around production so that lines are not disturbed. Policy drafting, the statement of applicability, evidence collection and corrective actions run remotely on Effivity between visits. Lakshy has not published a Manesar case study; the case studies below come from ISO 27001 engagements elsewhere in India.

ISO 27001 AT A GLANCE

ISO 27001 certification: scope, steps, time and cost

ISO/IEC 27001:2022 sets the requirements for an information security management system (ISMS): a risk-based way to decide, operate and improve the controls that protect the confidentiality, integrity and availability of information. An accredited certification body certifies the ISMS after a two-stage audit. The certificate runs for three years, with surveillance audits in the first and second years.

How a Lakshy project runs. Gap assessment; risk assessment and the Statement of Applicability against the Annex A controls; control implementation; awareness training; internal audit and management review; then the Stage 1 and Stage 2 certification audits. A typical single-site project takes 90 to 150 days. Larger or multi-site scopes take longer, and the gap assessment fixes the actual plan.

What it costs. Consulting and implementation support typically falls between ₹90,000 and ₹3,00,000, depending on scope and man-days, plus certification body fees of roughly ₹40,000–₹60,000 (indicative) for a small organisation. Location does not change the fee structure: site visits are planned into the proposal. A free gap assessment gives an exact quotation.

Why Lakshy. ISO/GRC experts, 8,100+ clients since 2003, a 100% on-time completion record and certification only through accredited certification bodies. Work between visits runs on the free Effivity platform.

Read the full ISO 27001 guide: requirements, Annex A, audit stages and costs →

Included in every Lakshy engagement: a five-user Effivity ISO & GRC software subscription and complimentary Sterling Academy awareness e-learning for your team.

FAQS

Frequently asked questions in Manesar

Does ISO 27001 meet a vehicle maker’s AIS-189 requirements for suppliers?

Not entirely. AIS-189 applies to the vehicle maker’s cyber security management system, which then sets supplier obligations; ISO 27001 covers your organisation’s controls and is a strong base for meeting them.

Should production machines be in our ISMS scope?

Usually yes, where they connect to your network or hold customer programs and data. Excluding them leaves a common attack path outside the controls.

We are a small design office in Manesar. Is ISO 27001 practical for us?

Yes. The standard scales to the risks and size of the organisation, and a small office can certify with a focused scope.

How do the DPDP Rules affect a factory?

They apply to the personal data of employees, contract workers, visitors and customers. A factory needs to know where that data sits and who can see it.

Will our certification body audit the shop floor?

If production systems are in scope, yes. Auditors sample controls on networks, machine controllers and data servers as well as in offices.

Sources for this page

  1. About Gurugram (District Administration Gurugram, Government of Haryana, accessed 2026-10-23)
  2. Make in Haryana Industrial Policy 2025 (Invest Haryana, Government of Haryana, 2025-09)
  3. ICAT, Manesar awards the First PLI-Automotive Certificate (Press Information Bureau, Ministry of Heavy Industries, 2024-03-04)
  4. AIS-189: Approval of Vehicles with regards to Cyber Security and Cyber Security Management System (Automotive Industry Standards Committee, CMVR-TSC, Ministry of Road Transport and Highways (printed by ARAI), 2024-04)
  5. CERT-In issues directions relating to information security practices and reporting of cyber incidents (Press Information Bureau, Ministry of Electronics and IT, 2022-04-28)
  6. Government notifies DPDP Rules to empower citizens and protect privacy (Press Information Bureau, Ministry of Electronics and IT, 2025-11-14)
TALK TO AN EXPERT

Talk to a Lakshy expert serving Manesar

Lakshy ISO/GRC experts work on site with organisations across Manesar. Your first conversation can be a call, a WhatsApp message or a video meeting, and we assign a dedicated ISO/GRC expert to you.

NEXT STEP

Start with a free gap assessment.

Thirty minutes with a senior specialist, benchmarking your organisation against every requirement of the standard. No cost. No obligation.

Book My Free Session
BUYER BEWAREA certificate in 7–10 days — no audit, no implementation — is not certification. It is paper.Know the red flags →
Scroll to Top